Features

The most flexible OEE shopfloor software
OEE Coach logo

OEE COACH:

Continuous Improvement Software with a Vision

Doubling the capacity of a factory is mostly possible, however not top-down by ‘command and control’ and -unfortunately- not from behind a computer.

OEE COACH is designed to support the shop floor team in their pursuit of perfection. It’s main goal is to give direction to the improvement efforts and to give relevant answers to those who try to solve structural problems in a structural way. OEE Coach aims to support the operation; make factory-life more easy.

Easy to use by the shopfloor

  • ONE application provides access to data-gathering, processing and analyses
  • Intuitive user-interface: designed for shopfloor use
  • Configurable per system and per user
  • Effective user-access policy per user, PC and role
easy to use on the shopfloor

Easy and meaningful Analyses and Reporting

Why spent a lot of emphasis on the way data is been acquired, when there is barely data-crunching possible to gain the right insights, needed to eliminate the losses that reduce the value creation of the equipment? OEE COACH strives to give answers to any relevant question about occurring losses. It has four types of data-processing:

Charts and Reports in OEE Coach

Aggregating charts

Bring loads of data back to one chart to give a resume; give insights at a glance.

In-Time charts

How is the development in time; data will be aggregated per shift, per day, per week or per month.

Aggregating reports

Sum- and group loads of data in order to gain more insight in underlying numbers.

In-Time reports

Shuffle data in a way the actual or grouped data allow a more understandable way of presentation.

Most Flexible Data Acquisition

Whether you want to collect OEE data manually, using OEE forms, or fully automated using sensors, OEE COACH provides user-friendly solutions.

  • Manual data-collection, entering data retrospective
  • Semi-automatic; the system counts time etc.
  • Fully automated, sensors take care of activities and output

Sequential Time registration

Shifts are registered time-based. Start-time and duration of shifts are pre-defined. In this way no time gets ‘lost’ nor can time be registered redundant. Registering, editing, splitting and deleting events: it is easy and flexible, yet the systems keeps monitoring all entered data and will give feedback when something looks not very plausible.

Are your shifts flexible? No problem, OEE COACH can cope with that!

Stable Operation

OEE Software in general will be used in sometimes though environments. And yet it has to remain reliable. Our database design, the way we access the database remotely, the way we keep the data integrity safe; all provides a solid operation. And even if you might get struck by an unexpected event: our content- and technical specialists will provide a solution to keep you going.

Data Validation

Operators, Team-leaders or Administrators can validate large amounts of data (queried or not) to find out instantaneously where to find flaws in the imported or entered data. Structural mistakes, such as maximum speed defined to low, can be adapted automatically, applying queries such as machine, data-range etc. Generating information based on invalid data will be detected in order to prevent erroneous charts etc.

Reliable data

Whether OEE data is gathered (and entered) manually, semi-automatic or fully automated, our experience is that it usually contains a lot of errors. We included several types of provisions to make sure the data is checked and tested for correctness or plausibility whenever possible. Since most of the databases we convert contain malicious data, we also provide mechanisms to clean up such databases.

Up- and running within 24 hrs

With a bit of preparation it is possible to get your OEE registration up and running within 24 Hrs;
  • Software installation
  • Defining OEE parameters
  • Training shopfloor people
  • Start data collection

Can handle any type of manufacturing equipment very flexible.

It was a huge challenge to design a software that would be able to handle virtually any type of equipment.

Whether batch, process or discrete: OEE COACH will take care.

Just to give you a clue of the issues we had to find a solution for:

  • Machines generating several products in parallel
  • Arrays of machines simultaneously generating different products
  • Environments working in metric AND imperial measures
  • Environments where output is determined by several values
  • Environments using different shift models
  • Machines using extreme different cycle-times
  • Machines running un-manned

Service and Implementation

OEE COACH is not an off-the-shelf product you  can buy at any corner. It is also not just software.

Although it is a very powerful tool, it can only be fully utilized when fully understood. Not the software is the heart of its revenues, it is the way it is being used. It’s implantation will be guided by a network of highly experienced improvement teachers and consultants in the field of TPM, Lean and Monozukuri.

You will have your personal coach that will provide the first line helpdesk. These coaches will be supported by the OEE COACH Development Team.

OEE COACH connected factory

The Connected Factory

We do not believe in ‘one size fits all’ solutions.

SPC, FMEA, OEE, CMMS, Planning etc. are highly specialized applications. In every field you want the BEST solution. 

With DATALYZER OEE COACH you connect the best OEE, SPC, ERP and CMMS solutions. 

Why choose a weak compromise when you can have the best in any field!

Choose a future proof platform that will grow with your needs!

 

Request access to the TOUR OF FEATURES

I require... *

Currently we use... *

7 + 6 =